The actual sewing portion of our sewing lessons is finally taking place - yippie!  I thought it was really important for me to work on this this past weekend, being that this is a summer dress and it’s almost August! (Although for those of us in California, summer is only beginning.)

Before we start, I want to let you know that I updated the last post (about cutting) with an alternative method to transferring pattern marks - this could be especially helpful for beginners. (Thanks, Andrea!)  And to recap, these sewing lessons focus on recreating my own Built by Wendy dress, pattern #3835.

Let’s sew!  To begin, follow the directions in the pattern for Dress A, Mini Dress B: Pockets A. As you can see in the above photo, I only added one pocket (on the left because I’m left-handed), added rick rack and cut the pocket piece on the bias (diagonal to the grainline).  This is not how I made the original Modern, Old-Fashioned Dress but since this is my 3rd time making this pattern I had to do something different!  Feel free to make these changes (or any, really) but if you’re a beginner it might be best to make the more simple version (pocket cut as indicated on the pattern); sewing rick rack on the bias can be a little frustrating which can lead to you not liking sewing!  (To clarify, fabric cut on the bias has stretch and sewing stretchy fabric can be tricky.)

Anyhow, I usually like to pin perpendicular to the stitch line as you can see here:

After you sew on the pockets, continue following the rest of the pattern, making the back darts.  Don’t forget to leave long (3″ or so) threads at the beginning and end of your darts so you can tie knots (as opposed to backstitching).

French Seams: For the back and side seams I made French seams, which is where the seam allowances are completely enclosed within themselves; this is great because it looks nice and prevents raveling.

This is how I like to do it:  Begin with the back center seam.  First, with WRONG sides (of the fabric) together, stitch seam 1/4″ from the edge.  Cut any loose threads that stick out.

Open up the back so the entire piece lays flat.  Press the seam flat, with the seam allowance to one side.  Then fold the back piece along the stitch line, RIGHT sides together, enclosing the seam; press.  Stitch the seam 3/8″ from the edge, enclosing the previously made 1/4″ seam allowance.  Open up the back piece again and press the seam nice and smooth.  (It doesn’t matter to which side the seam allowance falls.)

Repeat this process for the side seams; when you are done press seam allowances towards the back of the dress.

In our next lesson, we’ll begin with the sleeves - stay tuned!